Prior to replacing the engine, I had upgraded many of the parts on the old drive train. During the repower project, I saved as many parts as possible to hopefully have them go on to a new life and help other Catalina owners. If I can recoup a few dollars in the process, all the better.
If interested, contact me on Facebook Messager and make an offer. Located in Escondido, CA for local pick up. For anywhere else, buyer pays all packing and shipping costs.
| Item | Cost New | Date | Condition | Status | Notes |
|---|---|---|---|---|---|
| Engine (M25XP) | n/a | 1987 | fair | gone | |
| Transmission (Hurth HBW-50) | n/a | 1987 | fair | gone | |
| Prop shaft | n/a | 1987 | good | Desmond | Bronze, with coupler |
| Prop | n/a | 1987 | good | Desmond | Bronze, 15×9 |
| Engine control panel (Original from Catalina) | n/a | 1987 | fair | Includes tach, temp, oil pressure, volt meter, dual-alarm module. No start, glow, or key switches | |
| Fuel gauge | n/a | ??? | good | ||
| 12v buzzer | n/a | ??? | good | Brian | Replaced original failed buzzer on panel |
| Thermostat housing w/2 senders | $311 | 5/22/2023 | excellent | Brian | Includes alarm and temp senders, connector hose, clamps, extra bolts, extra bleed valve, and gasket |
| Thermostat | $60 | 5/22/2023 | excellent | Brian | |
| Starter | $195 | 8/24/2020 | excellent | ||
| Water pump | $300 | 5/22/2023 | very good | Oberdorfer. Impeller nearly new. | |
| Water pump | $300 | 3/10/2020 | good | Oberdorfer. Needs new seals. | |
| Alternator CM105-ER | $750 | 6/30/2020 | excellent | Compass Marine 105A, externally regulated | |
| Balmar regulator 614 | $280 | 6/30/2020 | excellent | Great regulator for the CM105. Allows for derating to save wear on standard v-belt. | |
| Heat exchanger | $420 + $30 | 5/4/2023 | good | 3″ (upgrade) from Mr. Cool. Includes spare zincs ($30 new). Needs cleaned out and probably new end seals ($45) | |
| Heat exchanger | $400 +$45 + $30 | 3/10/2020 | very good | John | 3″ (upgrade) from Mr Cool. Freshly boiled, with new ends and seals ($45 new), needs paint. Includes spare zincs ($30 new). Slight dent in one hose fitting that may need to be straightened to get a good seal with hose. |
| Raw water hoses | $80 | 4/13/2021 | very good | Richard | From heat exchanger to anti-siphon, and then on to the exhaust riser. |
| Raw water anti-siphon | $50 | 4/13/2021 | very good | Richard | |
| Water-lift muffler | $700 | 4/13/2021 | excellent | John | From Catalina Direct |
| Exhaust riser+flange | $600 | 4/13/2021 | excellent | John | From Catalina Direct. Stainless steel |
| Hump hose | $45 | 4/13/2021 | very good | John | |
| Exhaust hose (16′) | $300 | 6/16/2021 | very good | Richard | |
| Water heater | n/a | ??? | good | engine + 120v. Worked well when removed, but no idea of age or internal condition. | |
| Engine shutoff cable | $100 | 4/13/21 | very good | ||
| Oil filter | $20 | new | Richard | ||
| Fuel filter | $15 | new | Richard | ||
| Belt | $20 | new | Richard | Qty: 2 | |
| Impeller | $35 | new/excellent | For Oberdorfer water pump 1 new, 1 slightly used. | ||
| Impeller | $35 | new | For Oberdorfer water pump | ||
| Thermostat | $60 | new | |||
| coolant hose (3/4″) len=20′ | $170 | new | |||
| fuel hose (35/16″) len=? | new | Probably around 30′ left on 50′ roll (roll cost $140 new) | |||
| Beta Marine control panel parts | n/a | new | “C” control panel parts from Beta Marine – Face plate – Volt gauge – Starter switch – Stop switch – Indicator lights All other gauges and wiring not included |
